C3 Corvette 1978-1982 LED Digital Dash Gauge Instrument Cluster Direct Fit BLUE

Description: DOES NOT INCLUDE HOUSING/BEZEL; THAT IS FOR DISPLAY PURPOSES ONLY This listing is for Bright BLUE LEDs. Modernize your classic C3 Corvette interior with an INTELLITRONIX LED Digital gauge upgrade. Manufactured to replace your factory gauge panels with long lasting Super Bright LEDs. Factory original C3 Corvette mechanical gauges can be highly inaccurate, faded, and even cease to function...leaving you not knowing what the vital functions of your engine are really doing. But, you can do something about that by modernizing with this Intellitronix digital gauge upgrade kit. Engineered as a complete, direct-fit solution, this upgrade gauge kit bolts directly into your existing gauge panel, without drilling or hacking up your factory parts and provides precision digital accuracy with all vital engine functions. Bright LED readouts for just the right amount of visual excitement. The 0 to 255 MPH speedometer features one-button calibration, (NOTE: if you have not changed your original tire size or rear end gear ratio this included feature is not needed) regardless of tire size, gear ratio, or transmission. Plus, you'll get instant access to your 0-60 time, 1/4 mile Elapsed Time and top speed memorization recall (instead of you looking down at your speedo at 200mph and killing yourself, you simply wait until you stop and then press the button and see what the TOP SPEED WAS!). Each kit includes complete circuit boards, Plexiglas lens, mounting hardware, all necessary sending units, and detailed installation instructions. Because it's made in America and includes a limited lifetime manufacturer's warranty, you know you are getting the very best digital gauge solution. The vibrant and crisp easy to read lights will increase safety and give the interior of your C3 a completely refinished look. https://www.youtube.com/watch?v=xjp63gklhbo If you have an LS engine, then please be aware that you will need adapters (metric to non-metric) for our sending units. Though they may have been included with your engine kit, so you may already have them. If not, we sell an LS swap kit separately. Also, please send a note to seller letting us know, so that we can set the tachometer accordingly. Includes: 255 MPH Includes Odometer, Trip Meter, & One Button Calibration 0-60 time, 1/4 Mile ET And High Speed Recall Tachometer 0-9,900 RPM In 100 RPM Increments Water Temperature Display With 100-300 °F Range Sender S8013 Included. Oil Pressure Display With 0-100 PSI range, Works With Existing Factory GM Sender Oil Temperature Display With 100-300 °F Range additional Sender S8013 Included, this is in substitute for the factory clock since we know your updated stereo has a clock in it:) Voltmeter Display With 8-18 Volt Range, No Sending Unit Required Fuel Level Display With 0-99% range in 1% increments, Utilizes the stock factory GM Sending Unit Uses Original Factory Turn Signals And High Beam Indicator Made In The USA FULL MONEY BACK GUARANTEE IF YOU'RE NOT 100% SATISFIED!!

Price: 386.32 USD

Location: Eastlake, Ohio

End Time: 2024-08-08T20:21:45.000Z

Shipping Cost: N/A USD