Truetone 1 SPOT Pro CS11 BRAND NEW WITH WARRANTY! FREE PRIORITY S&H IN U.S.!

Description: . FREE Priority Shipping in the U.S.! We are an Authorized Truetone Dealer. Thank you for checking out our sale here for a BRAND NEW in box with manufacturer's warranty Truetone 1 SPOT Pro CS11. The 1 Spot Pro CS11 is the same size as the CS12, but with all new outputs and options. It doesn’t replace the CS12, but gives users more power and more available 9Vdc outputs. It also has “one more” output on the back, which allows users to connect the CS11 to Truetone’s new expansion boxes like the XP5 and XP8. It goes to 11… and so much more.The 1 SPOT Pro Story “A lot of people over the years had told us that we should make a power brick. Even some of my own staff urged me to do it, but I didn’t want to for two reasons. First, I knew the 1 SPOT could power just about every pedal out there, so I didn’t see the need. Second, I didn’t want to make just another knock-off of someone else’s power brick. If we were going to make one, we were going to do it our way and have features that nobody else could offer. As pedal designs changed and it became more common for digital pedals to require isolation and for others to need something other than 9Vdc, I finally saw a reason for us to design a power brick.” “It took 3 years and lots of experimentation, but we were finally able to design a 1 SPOT Pro, using our own proprietary technology to give musicians all the features they need for today’s pedalboards. The original 1 SPOT still works great for most musicians, but for those who need more power and versatility, the 1 SPOT Pro fills the need perfectly.” - Bob Weil (Founder & President - Truetone) 1 SPOT Technology 1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn’t changed in decades and has a lot of limitations. We took the same triple filtered switching power supply technology found in our famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, we were able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world. A major benefit of using a switching power supply is that it can handle far more current (power being pulled out of it) than any transformer-based power supply. Although we had to put power rating labels on each output to satisfy certification agencies (yes, we actually certified these, unlike many companies), the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output, without causing any problems. With a transformer-based power supply, you can’t get away with that. The important thing is to not exceed the total of all the labels. With a CS7 (for example), the output labels add up to 1900mA total. That means the total current draw of all your pedals should be less than 1900mA. Cables The 1 SPOT Pro CS11 includes a generous assortment of cables and converter plugs. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end. Power cables (all are center pin negative polarity): (2) DC26 (5.5x2.1mm barrel plugs; 26” (660mm) – Purple (2) DC22 (5.5x2.1mm barrel plugs; 22” (559mm) – Blue (4) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White (3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow (1) MC2 Two 5.5x2.1mm barrel plugs with 5.5x2.1mm input socket. Converter Plugs: (1) CL6 – (5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity) Green – for Line 6 DL4/M9/etc. and some Eventide pedals. (1) CYR – (5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity) Red – reverse polarity converter (1) C35 – (5.5x2.1mm barrel input, 3.5mm male output; tip positive) Black – 3.5mm (1/8”) plug converter (1) CBAT – (5.5x2.1mm barrel input, Black battery clip output) Connects to battery clip wires inside pedals that do not have DC jacks. Do NOT connect to a battery! (1) C2.5 – Gray – 5.5x2.5mm plug converter - can be used for Line 6 HX series and POD Go Can the 1 SPOT Pro power my pedal? That question can best be answered by looking at the following questions and notes… Which output and settings do I use for my pedals? It is important for you to know the power requirements for your pedal. For every pedal that you are going to power via the 1 SPOT Pro CS11, you need to know the following: What is the voltage required by the pedal? Does the pedal require AC or DC voltage? What is the polarity of the pedal? (Center pin positive or negative.) These questions can usually be answered by: 1. Inspecting the pedal itself near the power jack. 2. Referring to the owner’s manual. 3. Checking online, or contacting the manufacturer 4. If your pedal can be powered by a 9Vdc battery, it can be powered by one of the 9Vdc outputs (an exception being the Boss ACA pedals, see below). Notes on using certain pedals with the 1 SPOT Pro CS11: • Older Boss pedals marked “ACA” use outputs 5 or 6, set to 12Vdc. Newer Boss units marked “PSA” can be used with any 9Vdc output. • For pedals with a current draw higher than 400mA, please utilize outputs 1,2,10 or 11. To be sure about the current draw of your pedals, please use a Truetone mA Meter, sold separately. • Eventide Factor pedals and H9/H90 may be powered by any output with a rating of 250mA or higher, with the addition of the CL6 converter for proper DC jack tip size and polarity. • Line 6 M9 may be powered by outputs 1,2,10 or 11, but will also require the CL6 converter. • Line 6 M5 may be powered by outputs 1,2,10 or 11, without a converter plug. • Line 6 HX series and POD Go require a C2.5 converter. Please note, although they can be powered by outputs 1,2,10 or 11, it is recommended to power them from 2 of those outputs combined using a Truetone MC2 cable (included) to split the current load. • If additional analog 9Vdc pedals need to be powered, a Truetone Multi-Plug cable (sold separately) may be connected to any of the 9Vdc outputs depending on mA draw. If additional pedals need isolation, you may purchase a Truetone XP5 or XP8 expansion box which connects to the 12Vdc jack on the back panel. The XP5 has 5 isolated and filtered outputs, while the XP8 has 8. • Pedals that do not have a power jack, yet are powered normally by a 9Vdc battery, may utilize any 9Vdc output, along with the CBAT converter. • Digitech Whammy: Version 5 or Whammy DT may be powered by outputs 1,2,10 or 11. Versions 1-4 cannot be powered by a CS11, unless you purchase the optional Truetone ACY-US cable (North America only) and use the original Digitech Whammy power supply. • Radial Tonebone 15Vdc pedals can be powered by outputs 3 or 4, switched to 18Vdc, using the Reverse Polarity Converter (CYR) included with the 1 SPOT Pro. Dimensions 205 x 86 x 50mm (8.07 x 3.38 x 1.97”); 971 grams (2.14 lbs.) - weight and dimensions of power supply only, not including cables or packaging. Feel free to contact us with any questions before buying. Check out our excellent feedback record and buy with confidence! Thank you very much!

Price: 219.99 USD

Location: Nashville, Tennessee

End Time: 2024-11-12T19:15:03.000Z

Shipping Cost: 0 USD