YZ-056 Electrolytic Capacitor Withstand Voltage Leakage Current Tester Insulatio

Description: eBay Electrolytic Capacitor Withstand Voltage Leakage Current Tester Insulation Resistance Diode Triode Voltage Stabilizer Model Number: YZ Measure the withstand voltage and leakage current of electrolytic capacitors, the withstand voltage of transistors, the voltage stabilization value of zener tubes, and the leakage of household appliances, with a withstand voltage of 3V-1500V (DC), test electrolytic capacitors of around 3000Uf, suitable for maintenance, Belonging to low power, parameters: 1. Test voltage: DC 3-1500V 2. Voltage accuracy: ±4% 3. Leakage current range: 0－2mA 0－20mA 0－100mA 4. Display mode: full digital display 5. Volume: 220 x 210 x 75mm 6. Weight: about 3.5gk 7. Power consumption: 20W 8. Power source: 220V±20% Model Number: YZ-056 YZ-056 typeThe maximum withstand voltage can reach 2000V, and it can test electrolytic capacitors of about 5000uf. It has the functions of fast test, slow test, coarse adjustment, fine adjustment, etc., suitable for capacitance pumping test trial. Parameters: 1. Test voltage: DC 3-1800V (up to 2000V) 2. Voltage accuracy: ±4% 3. Leakage current range: 0-20mA 0-100mA 4. Display mode: full digital display 5. Volume: 280 x 240 x 90mm 6. Weight: about 4gk 7. Power consumption: 40W 8. Power source: 220V±10% Model Number: YZ -056B YZ-056B typeThe maximum withstand voltage can reach 750V. Capacitors of about 10000Uf are tested for high power. The withstand voltage and leakage current of electrolytic capacitors can be preset, with over-limit, qualified judgment and over-limit alarm, large charging current and fast test speed. It saves time and has high work efficiency. It prevents operators from being irresponsible and mistakenly mixing unqualified products, leading to their own production of inferior products. It is a highly intelligent testing instrument suitable for electrolytic capacitor manufacturers' production lines. Fast, large-scale testing, and purchase inspection of electrolytic capacitors using unit dealers. parameter: 1. Measuring voltage: 0-500V Actually 700V can be measured 2. Accuracy: ±5%, continuously adjustable 3. Leakage current test range: 0～30mA, divided into 10 levels, basic accuracy: 0.5 uA～30mA ±5% The first file: 0.2～1 uA Second gear: 1～3 uA The third file: 2~10uA Fourth gear: 10～30uA Fifth level: 20-100 uA The sixth gear: 100～300uA Seventh gear: 0.2～1mA Eighth gear: 1～3mA Ninth gear: 2～10mA Tenth gear: 10～30mA 4. Maximum charging current: 200mA±20% 5. Charging time: 0-99 seconds Manual control 6. Leakage current preset: arbitrarily set by the panel potentiometer Accuracy: ±5% (alarm leakage current setting) 7. The leakage current experiment exceeds the preset value, and the instrument emits a light alarm (the bad indicator light is on) and an acoustic alarm (the acoustic alarm switch is set on the rear panel of the instrument) 8. Charging/measurement can be automatically converted 9. The instrument is equipped with a discharge/measurement switch 10. Power supply voltage: 220∨±5% Frequency: 50Hz±5% Power consumption: <30W 11. Volume: 330mm×115×300 mm 12. Weight: about 5Kg

Price: 147.49 USD

Location: CN

End Time: 2025-01-20T09:10:36.000Z

Shipping Cost: 106 USD